Shenzhen Baiqiancheng Electronic Co.,Ltd
+86-755-86152095

Pinout Standard for PCBA

Dec 15, 2023

During the PCBA welding process, PCBA manufacturers need to process and trim some plug-in components. After passing through the furnace, they also need to trim some components with longer pins.

For general components, the length of the pins on the board should be controlled within 0.8mm-3.0mm, depending on the type of component. For example, the pin length of electronic components in transformers should be at least 2.5mm.

The forming methods for electronic components can be roughly divided into two types: vertical forming and horizontal forming. The length of the pins for electronic component forming can be divided into three types:

(1) Component forming pin length=Component pin extension length (L)+PCB board thickness (T)

(2) Component forming pin length=Component pin extension length (L)+PCB board thickness (T)+Height raised above PCB board surface (H)

(3) Component forming pin length=Component pin extension length (L)+PCB board thickness (T)+Height raised above PCB board surface (H)+Component body height (b)

According to the latest IPC-A-610F three level standards, level 1 does not affect assembly; Level 2 shall not exceed 2.5mm, and Level 3 shall not exceed 1.5mm.

IPC is an internationally recognized standard, which generally needs to be determined based on customer requirements and component types in actual PCBA welding. From the perspective of solder joint reliability, short pins can affect the appearance of solder joints, leading to insufficient solder joint strength and reliability.