Shenzhen Baiqiancheng Electronic Co.,Ltd
+86-755-86152095

Introduction to Solder Mask Layer

Dec 15, 2023

The solder mask layer can actually be called a window layer or a green oil layer, and it also has an English name - solder mask

The solder mask layer refers to the area on the PCB where green oil is to be applied, and this solder mask layer uses negative film output. Therefore, after the shape of the solder mask layer is mapped onto the board, it is not green oil solder mask, but rather exposed copper skin. Exposed copper skin, we habitually call it opening a window.

The basic components of a printed circuit board are solder pads, via holes, solder mask layers, and text printing parts. The solder mask layer refers to the yellow, red, black, green, or other colored parts that people see, and some boards have a yellow solder mask layer. The function of the solder mask layer is to prevent parts that should not be soldered from being soldered together, and reflow soldering is achieved through the solder mask layer. The entire surface of the board is scalded with tin water, and the exposed circuit board without a solder mask layer is soldered, while the part with a solder mask layer is not soldered.

The four primary types of solder mask layers

The solder mask layer can prevent conductive solder bridging between various electronic components. In essence, it obstructs the short circuit. The different PCB solder mask layers are as follows.

Top and bottom masks: Electronic engineers know about various openings. He knows what has been added through ink, epoxy resin, or film technology. Then, with the assistance of confirming the orientation, he can solder the component pins on the board. You can also notice the conductive trace pattern on the top of the circuit board. These are called top stalks. The lower one is the bottom mask.

Epoxy liquid: If you want a cheaper choice, please choose epoxy liquid. Thermosetting polymers have multiple applications. Silk screen printing is a printing technique. It uses woven mesh to support the ink blocking pattern. The grid can create an open area for ink handling.

Liquid ink can be used for photographic imaging: We provide a solder mask layer as the ink formula. Can spray ink into the PCB. Then, the pattern can be exposed and developed. It should be noted that this process and liquid ink formula should be used. This requires a clean environment without pollutants and particles. People can remove it after exposing it to ultraviolet radiation. This is achieved through high-pressure water spray called developer.

Dry film photographic imaging: using this solder mask layer through vacuum lamination. After development is completed, you can create openings and weld components onto copper pads. In addition, use tin to maintain copper circuits. Then remove the dry film.