Shenzhen Baiqiancheng Electronic Co.,Ltd
+86-755-86152095

Photovoltaic module material: photovoltaic film

Jan 05, 2023

Photovoltaic film generally refers to photovoltaic EVA film. Photovoltaic film is a material that plays a key role in the packaging of photovoltaic modules, and is one of the parts of photovoltaic modules. Adhesive film bonded photovoltaic cell sheet, photovoltaic glass and backplane, the main role is to protect the cell sheet, and encapsulate it into a photovoltaic module that can output direct current.

There are many kinds of film, different characteristics, and different application scenarios. At present, there are transparent EVA film, white EVA film, POE film, EPE film and so on.

1, transparent EVA film: used for photovoltaic module packaging, high PID resistance, high transmittance, anti UV moisture and heat yellodegeneration, anti snail lines, and glass and backplane good adhesion, the disadvantage is poor reflection, high permeability, easy to produce PID phenomenon; It is widely used in the encapsulation of single/double glass components.

2. White EVA film: Used for the encapsulation of the lower side of the photovoltaic module cell sheet, with high reflectivity. White EVA film can make the sunlight reflect to the surface of the battery twice, improving the power generation efficiency of the solar module; Can meet the single glass components, double glass components, and film components of high yield packaging processing requirements, the price is relatively high

3, POE film: POE resin as the raw material, used for single PERC double-sided, N type battery components, especially in the double glass components of the high efficiency battery widely used, higher water vapor barrier rate, better weather resistance and stronger PID resistance.

4. Co-extruded POE film: It is also EPE film, namely "Eva-Poe-EVA" structure. It belongs to the co-extruded POE film, which combines the advantages of POE anti-PID performance and EVA low cost. It is suitable for PERC double-sided double glass, N type double-sided double glass and other photovoltaic modules with high weather resistance requirements. It not only has the high water resistance and PID resistance performance of POE material, but also has the lamination process characteristics of high yield of EVA material double-glass components, and is less affected by the relative shortage of POE resin supply.