In the PCBA (printed circuit board assembly) production process, material baking is a key pre-process, especially for Moisture Sensitive Devices (MSD) and PCB substrate is crucial. The main purpose of this step is to remove the moisture absorbed inside the material to avoid quality problems during subsequent reflow soldering or high temperature processing. The following are the core reasons for baking materials:
1. Prevent the "popcorn Effect"
When humidity sensitive components (such as BGA, QFN, IC, etc.) are welded at high temperatures, the internal water will quickly vaporize and expand, resulting in package delamination, cracking or solder joint holes, which is called the "Popcorn Effect". Baking can effectively reduce humidity and avoid device damage.
2. Improve welding reliability
After the PCB substrate or components are damp, the oxidation or wettability of the pad becomes poor, which easily leads to virtual welding, cold welding or tin ball splashing. After baking, the surface of the material is drier, the solder fluidity is better, and the welding quality is significantly improved.
3. Meet industry standards
IPC/JEDEC standards, such as J-STD-033, specify storage conditions and baking parameters for humidity sensitive components. For example, components with a humidity sensitivity rating (MSL) of level 2 or higher that are exposed to air for longer than the specified time must be baked before use.
4. Avoid PCB layering
After the substrate of the multi-layer PCB (such as FR4) absorbs moisture, the inner layer may be separated due to thermal stress at high temperatures. Baking can discharge the moisture in the plate to ensure structural stability.
5. Optimize production yield
Unbaked materials can cause batch defects (such as device failure, PCB deformation) and increase repair costs. Baking in advance can significantly reduce the production risk and improve the overall yield.






