PCBA processes jigsaw puzzles, even if the size of a single board can pass through the track of the mounter. Choosing 1pcs, 1pcs and 1pcs to grind slowly not only wastes the production capacity of the mounter, but also is irresponsible for the production efficiency. So if we put together 10pcs, 20pcs, ... and so on. In this way, PCBA can improve the processing of light plate printing solder paste. And the SMT chip can be mounted in first pass yield in a short time. With less wire change, the circulation time of the circuit board on the track is less, which naturally improves the efficiency. In this way, the utility of a single device is maximized and the profit space of the company is improved. PCBA processing jigsaw puzzle has another cost-saving benefit of PCBA processing plant, because PCBA processing plant has finished processing. After that, a lot of tests and assembly are needed, such as aging test, burning test, LCT test, signal test, etc., so there will be more circulation time in the production workshop, which is also a great requirement for the storage space of the patch after processing. If it is a patchwork storage, there may not be so many trays, and it can be connected to the board test, which can also save the wasted working hours when the board is taken and placed in the fixture.
