The problem of assembling operation in PCBA processing and production, in the general PCBA processing factory, a assembling operation will be carried out in circuit board production. No matter in PCBA processing factory or PCBA processing and design, everyone needs to increase the edge of the board, and the purpose of this technology is to increase the efficiency of chip processing and production. Because the track of the mounter has a maximum and minimum size limit, for example, the maximum can pass through a board with a size of 570mm*750mm, and the minimum can pass through a board with a size of 350 mm * 400 mm. Not more than, not too small. This can be found if you often go to the production workshop of PCBA processing plant. Moreover, at present, the most time-consuming part in SMT chip processing is solder paste printing. First of all, regardless of the programming time of solder paste printing, that is, the process of brushing solder paste, regardless of the size of PCBA processing, in order to ensure that solder paste can be evenly coated on the PCB processing pad paper, the printing time must be guaranteed to be around 20s, because in contrast, several components can be printed in one second when the components are mounted in the mounter.






