Shenzhen Baiqiancheng Electronic Co.,Ltd
+86-755-86152095

Requirements for Preheating before PCBA Repair

Jan 26, 2024

With the rapid development of electronic products, the volume of electronic products is becoming larger and smaller, which poses great challenges to production and reverse repair [1-3]. Especially for communication products, which have high reliability requirements, reliable repair is the core of PCBA (Printed Circuit Board Assembly) repair to ensure repair quality

Preheating is a prerequisite for successful repair, and using an oven to preheat the substrate before repair can avoid the phenomenon of popcorn. The so-called "popcorn" phenomenon refers to SMD (Surface Mounted Devices) The humidity is higher than that of normal components, and during repair, internal cracking occurred due to rapid heating. Unlike reflow soldering, which is done in a closed environment with a small temperature difference, repair involves local heating. The temperature difference between different areas on the PCB is relatively large. Without preheating or sufficient preheating, long-term heating at high temperatures during repair can cause substrate delamination, white spots or bubbles, discoloration, and other issues. At the same time, PCB deformation is also a serious problem during repair, especially for thinner PCBs. Single board deformation can easily lead to BGA solder joints or short circuits, and preheating in advance can effectively solve this type of problem.

Before repairing PCBA, it is necessary to preheat the single board correctly. At the same time, as the assembly density of PCBA increases and the device assembly becomes more precise, automatic or semi-automatic repair methods need to be considered [6]. The traditional handheld hot air gun or soldering iron is an uncontrollable process for heating PCBA. Because I don't know what damage it will cause to the circuit board, solder joints, and things around solder joints. I hope to use more controlled process methods and set appropriate temperature curves so that I can understand the impact of rework on other parts of the PCBA and what adverse effects it may have on the reliability of the circuit board.