As a transporter of diverse components and a hub for circuit signal transmission, the PCB has become the most crucial and critical component of electronic information products. Its degree of quality and reliability determines the whole machine's quality and dependability. Due to the development trend of high-density PCBs and the environmental requirements of lead-free and halogen-free, more and more PCBs have suffered from poor wetting, board explosion, delamination, CAF (Conductive Anodic Filamentation, conductive anode wire, refers to the leakage behavior of copper and copper salts that occurs during the migration of copper ions inside the PCB from the anode (high voltage) along the micro-cracked channels between the glass fiber wires.
To increase the quality and dependability of PCBs, material selection, production procedures, and environmental conditions must be closely managed throughout the manufacturing process. For example, in terms of base materials, selecting materials with low moisture absorption and high heat resistance can effectively reduce the risk of delamination and panel explosion; in terms of manufacturing processes, optimizing the welding temperature curve and improving surface quality can help improve wettability and reduce solder joint defects. Furthermore, by optimizing PCB design and adequately managing trace thickness, thickness, and interlayer structure, the danger of CAF may be avoided while improving circuit board stability over time.
Simultaneously, as electronic goods evolve toward high frequency, high speed, and thinness, PCB design and production encounter more difficult obstacles. Signal integrity, electromagnetic compatibility, and thermal management challenges have all become significant variables influencing PCB performance. To achieve this, advanced simulation technology and inspection methods are widely used, such as computer-aided design (CAD) for signal and power integrity analysis and non-destructive inspection technologies such as X-ray inspection (X-ray) and scanning acoustic microscopy (SAM) to assess internal structural quality. Potential faults may be spotted early on using these methods, boosting PCB reliability and prolonging the service life of electrical equipment.






