Shenzhen Baiqiancheng Electronic Co.,Ltd
+86-755-86152095

Importance of PCB test rack probe in electronic manufacturing industry

Jan 10, 2025

The spring probes in the PCB test stand are used to connect pads or test points on the PCB, so as to obtain key data such as voltage value and current value of the circuit when power is on. The following are some detailed information about the PCB test stand and its spring probes:

 

info-740-537

 

Electrical connection can be achieved by contacting the metal probe with a specific test point on the PCB. When the PCB board is powered on, the current and voltage values of the circuit can be measured, so as to judge whether the tested circuit works normally.

 

A typical PCB test stand is made of acrylic or bakelite and plastic, with metal probes for electrical connection, display screen for testing data, wires for connecting test points and measuring equipment, and a simple PCB circuit board for signal routing.

 

info-348-462

 

Because the size of each PCB, the location of test points and the parameters to be tested may be different, PCB test stands usually need to be customized. Before production, it is necessary to provide PCB design documents and other relevant materials to the test rack manufacturer to ensure that the test rack can be accurately adapted.

 

Both PCB bare board and assembled PCBA board can be inspected by probe testing technology combined with passive or active mode, and the probe will touch passive components such as resistors, capacitors, inductors and other feature points on the circuit board.

 

info-344-225

 

To sum up, the PCB test stand and its spring probe are an indispensable part in the electronic manufacturing industry, which ensures that the performance of the circuit board meets the design standards before leaving the factory.