Flux is usually a mixture of rosin as the main component, which is an auxiliary material to ensure the smooth welding process. Welding is the main process of electronic assembly, and flux is the auxiliary material for welding. The main function of the flux is to remove the oxides on the surface of the solder and the base metal to be welded, so as to achieve the necessary cleanliness of the metal surface. Prevent the surface from re oxidation during welding, reduce the surface tension of solder, and improve the welding performance. The performance of flux directly affects the quality of electronic products.
In general, and life support electronic products (such as satellites, aircraft instruments, submarine communications, life support medical devices, weak signal testing instruments, etc.) must use cleaning type flux; Non clean or clean flux can be used for other types of electronic products (such as communication, industrial equipment, office equipment, computers, etc.); General household appliances and electronic products can use cleaning free flux or RMA (medium active) rosin flux without cleaning.
(1) Function of flux: rosin resin and active agent in the flux produce living reaction at a certain temperature, which can remove the oxide film on the surface of welding metal. At the same time, rosin resin can protect the metal surface from oxidation at high temperature; Flux can reduce the surface tension of molten solder, which is beneficial to the wetting and diffusion of solder.
(2) Requirements for characteristics of flux: the melting point is lower than that of solder, and the expansion rate is more than 85%; The viscosity and specific gravity are smaller than those of molten solder, which is easy to be replaced and does not produce toxic gas. The specific gravity of flux can be diluted with solvent, generally controlled at 0.82~0.84; The non cleaning flux shall have a solid content of less than 2.0wt%, no halide, less residue after welding, no corrosion and good insulation performance; Water cleaning, semi water cleaning and solvent cleaning fluxes shall be easy to clean after welding; Stable storage at room temperature.
(3) Selection of flux: According to the cleaning requirements, the flux can be divided into four types: no cleaning, water cleaning, semi water cleaning and solvent cleaning. According to the activity of rosin, it can be divided into three types: R (non active), RMA (medium active) and RA (full active). The choice should be made according to the specific requirements of the product on cleanliness and electrical performance.






