Shenzhen Baiqiancheng Electronic Co.,Ltd
+86-755-86152095

Why does SMT solder paste need to be stirred before use?

Dec 20, 2024

Solder paste is an essential welding material in the PCBA processing process. It is mainly used for SMT patch welding. It is in the form of a paste and its main ingredients are tin powder and flux. Solder paste is generally divided into lead solder paste and lead-free solder paste. However, no matter which type of solder paste is used, it needs to be fully stirred before use. So why does solder paste need to be stirred before use?

Due to the different densities of the components of solder paste, if the solder paste is left standing for a long time, its components will settle and separate. Therefore, if it is not stirred, the components will not play their due role, resulting in inability to use it normally. This is why the solder paste needs to be stirred before welding. In fact, the solder paste needs to be warmed up before stirring, because the solder paste is usually stored in a refrigerated manner, and the temperature is generally around 5~10℃. If the bottle cap is opened without warming up, the solder paste will produce water vapor when it encounters heat and adhere to the solder paste, causing the solder paste to be damp, further increasing the undesirable phenomenon of board explosion during welding. Therefore, the solder paste needs to be warmed up before opening the cap, and the temperature of the warming up should at least be the same as the temperature of the use environment.

The solder paste needs to be stirred again after it returns to temperature before it can be used. The purpose of stirring is to fully blend the tin powder and the flux. There are generally two ways of stirring, one is manual stirring and the other is machine stirring. Manual stirring requires the operator to stir manually, and the stirring time is usually about 4 minutes, while machine stirring uses a solder paste mixer for stirring, and the stirring time is usually about 2 to 3 minutes.