The one-stop PCBA manufacturer BQC will tell you today what is the reason for QFN bridging in PCBA processing?
The amount of solder on the heat sink pad is insufficient. Due to the coverage of the heat sink pad and the absorption of tin by the heat dissipation hole (without plugging), the thickness of the weld that can be formed is relatively smaller than that of the signal pad. Under the action of surface tension , the solder on the peripheral signal pad is squeezed and expanded, which is prone to bridging. The effect test of the amount of solder paste on the heat sink pad on the weld shape of the QFN signal pad, using jet printing technology, the amount of solder paste on the signal pad remains unchanged (two printing points on the inner circle), and the amount of solder paste on the heat sink pad is one 5.4, a 2.5 when welding results. It shows that the amount of solder paste on the heat sink pad has a great influence on the weld shape of the peripheral signal pad, because the thickness of the weld determines the size of the solder expansion (QFN solder joints do not have Z-direction wetting).






