Shenzhen Baiqiancheng Electronic Co.,Ltd
+86-755-86152095

What is the Post Welding Process for PCBA

Apr 26, 2024

In the PCBA machining process, welding is a term that runs through the entire machining process, while in the DIP production workshop, the commonly used welding machine is wave soldering. Inside the machine, there are waves of flowing soldering liquid, which make the passing PCB boards evenly coated with tin, completing welding and greatly improving welding efficiency. But in many production workshops, post welding facilities can still be seen at the back end of wave soldering. So what is post welding process? What is the necessity of its existence?

2, The necessity of post welding process

1. Special components

During the processing, there may be special components requested by customers, such as components with high sensitivity that cannot undergo peak soldering, so manual soldering is necessary.

2. Components that are not resistant to high temperatures

As is well known, high temperatures are required for welding inside the wave soldering machine, and the temperature inside the furnace is generally higher than that of lead. Therefore, some components that are not resistant to high temperatures need to be soldered afterwards.

3. Improper shape of components

Wave soldering has requirements for the height of components, and generally, it is safe to enter the interior of the wave soldering. However, for components that are too high or too long, their height exceeds the standard height of wave soldering and requires post soldering.

4. When designing PCB boards, the components are relatively close to the edges of the board

During peak soldering, some components near the edge of the board may collide with the machine or fail to come into contact with liquid tin, which can affect the soldering effect and require post soldering.