Shenzhen Baiqiancheng Electronic Co.,Ltd
+86-755-86152095

What is the difference between AOI and SPI in PCBA processing?

Apr 10, 2025

In PCBA (printed circuit board assembly) processing, AOI (automatic optical inspection) and SPI (solder paste inspection) are two key quality inspection technologies, but their inspection objects, principles and application scenarios are significantly different. The following are the specific differences between the two:

1. Inspection object

AOI (automatic optical inspection)

Inspection object: soldered circuit board, including component welding quality, position offset, short circuit, open circuit, missing assembly, polarity error, etc.

SPI (solder paste inspection)

Inspection object: circuit board after solder paste printing, mainly inspecting the printing quality of solder paste.

2. Inspection principle

AOI principle: capture circuit board images through multi-angle light sources and high-definition cameras, and use image processing algorithms to analyze defects.

SPI principle: use laser triangulation or structured light projection technology to perform three-dimensional scanning of solder paste.

3. Application scenarios and inspection timing

AOI application scenarios: widely used in quality inspection after welding, covering consumer electronics, automotive electronics, medical equipment and other fields.

SPI application scenarios: focus on the solder paste printing link, which is the first quality checkpoint of the SMT (surface mount technology) production line.

4. Impact on production efficiency

AOI advantages: fast detection speed, batch scanning of circuit boards, and little impact on production efficiency.

Limitations: detection is required after welding is completed. If defects are found, they need to be repaired, which may increase subsequent costs.

SPI advantages: immediate feedback of problems during the printing stage, avoiding defective products from entering the subsequent process, reducing the rework rate and material waste.

Limitations: need to stop the machine for detection or integrate in the printing equipment, which may have a certain impact on production efficiency.

5. Summary: complementary rather than alternative

AOI and SPI play the roles of "post-welding quality inspector" and "solder paste printing guardian" in PCBA processing respectively. The combined use of the two can significantly improve the yield rate: SPI intercepts solder paste defects in advance and reduces the misjudgment pressure of AOI; AOI comprehensively detects welding and assembly problems to make up for the subsequent links that SPI cannot cover.