Solder paste is a compound that typically consists of a fusible metal alloy and some type of deoxidizing flux. Different pastes can have a variety of compositions, though a typical formula consists of powdered solder mixed in with a gel-like flux material. In many applications, solder paste will be used to hold components in place prior to soldering, and also provides the fusible alloy that is heated to permanently bond them. This type of solder is most commonly used in the reflow soldering of surface mount devices (SMDs). It is often applied using some type of screen printing method, though it may also be dispensed manually.
There are several different types of solder paste, and it is often classified by the size of the metal balls that make up the powdered metal. These solder balls are typically uniform in size to facilitate the printing process. Each size category is based on both the distribution of the balls throughout the flux material and the physical size of each solder particle. Ensuring a uniformity in both mesh and size tends to result in better printing, especially when a stencil is used. Irregularly sized particles of solder may clog a stencil, while a nonuniform mesh may result in areas of oxidation.
