Shenzhen Baiqiancheng Electronic Co.,Ltd
+86-755-86152095

What is PCBA DIP and Wave Soldering?

Feb 28, 2026

What is PCBA DIP and Wave Soldering?

 

In the world of PCBA (Printed Circuit Board Assembly), "DIP" and "wave soldering" are two closely related terms that refer to the process of assembling through-hole components, which are distinct from the surface-mount components placed by SMT machines.

DIP stands for Dual In-line Package. It refers to the type of electronic components themselves. These components have long, protruding leads or pins designed to be inserted into holes drilled through the circuit board. Classic examples include old-style computer chips, large capacitors, connectors, and relays. While modern electronics favor smaller surface-mount parts, DIP components are still used when a strong mechanical bond is required (like a plug connector) or for certain high-power components.

Wave Soldering is the manufacturing process specifically designed to solder these DIP components onto the board. It works exactly as it sounds: Once components are manually or robotically inserted into the board, the assembly is placed onto a conveyor belt. It passes over a flowing fountain (or "wave") of molten solder. This wave washes against the bottom of the board, touching the protruding leads and the copper pads surrounding the holes. The molten metal flows into the holes via capillary action, creating a solid electrical and mechanical connection.

In modern hybrid assembly, where a board contains both SMT and DIP components, a specific order must be followed. Typically, the SMT components are soldered first in a reflow oven. Then, the DIP components are inserted, and the board is sent through the wave soldering process, as the high heat of wave soldering would remelt and potentially damage the delicate SMT parts if done in reverse.