Shenzhen Baiqiancheng Electronic Co.,Ltd
+86-755-86152095

What is Ohmega material in PCBA board

Jan 05, 2024

OhmegaPly is a thin film flat resistor for PCB manufacturing. It is an embedded resistor layer created through an etching process and standard PCB printing. The resistor allows designers to maximize the use of space on the PCB surface. This Ohmega material is used as a blank state, giving designers a way to solve contemporary electronic challenges that require passive resistors.
 

OhmegaPly consists of a thin film resistance alloy layer and a copper conductive layer deposited on a copper foil. In addition, this material has a different standard thin layer resistivity. pcba manufacturers can bond this material to any dielectric material.
A wide range of applications have been integrating OhmegaPly since the 1970s. Over the past few decades, this material has demonstrated long-term reliability and stability. In addition, it has become a good alternative to other embedded resistors. The OhmegaPly resistor is designed for a wide range of advanced applications.
In addition, ohmegaPly includes nickel phosphorus (NiP) alloy. During the smt patch process of this material, engineers electrodeposited approximately 1.00 microns of alloy onto the copper foil. The copper foil is electrodeposited. This Ohmega material is available in 50 ohms per square, 10 ohms per square and 100 ohms per square with tolerances of +-5%, +-3% and +-5%, respectively.

 

OhmegaPly provides cost and design advantages. Eliminating discrete resistors helps engineers realize cost-saving benefits. Higher resistance density means more cost savings. This Ohmega material is used in a wide variety of applications. Some of the industry's leading Oems, such as Apple, Advance Fibre and Boeing, integrate these resistors into their products.
The size of the resistor and the type of dielectric material determine the amount of power applied. Typical power ratings for OhmegaPly are about 1/8 of a watt. However, the use of laminate materials with higher temperatures can improve this grade.