Shenzhen Baiqiancheng Electronic Co.,Ltd
+86-755-86152095

What are the reasons and steps for SMT virtual soldering?

Aug 27, 2024

1. Quality issues of weld joint surface: Check whether there are impurities such as rust, oil stains, or uneven surfaces with poor contact on the weld joint surface. These issues can lead to an increase in contact resistance and a decrease in current, resulting in insufficient temperature at the welding joint surface.

2. Abnormal overlap amount: Check whether the overlap amount of the weld seam is normal, and whether there is a decrease or cracking in the overlap amount on the driving side. Abnormal overlap can lead to a reduction in welding area, making it unable to withstand sufficient tension, especially cracking, which can cause stress concentration and ultimately result in strip breakage.

3. Current setting issue: Check whether the current setting complies with the process regulations and whether corresponding adjustments have been made when the product thickness changes. Insufficient current can lead to poor welding, especially when the current is not adjusted according to the thickness of the product during the welding process, which in turn affects the welding quality.

4. Insufficient welding wheel pressure: Check if the welding wheel pressure is reasonable. If the pressure is not sufficient, it will cause an increase in contact resistance and a decrease in actual current, thereby affecting the welding quality. Although the welding controller has a constant current control mode, if the resistance increases beyond a certain range, it will exceed the limit of current compensation, resulting in poor welding.

Virtual soldering is a common soldering defect in SMT surface mount processing, which may lead to product quality issues and production line accidents. Understanding the causes and solution steps of virtual welding is of great significance for ensuring welding quality and production efficiency. By checking the quality of the weld joint surface, adjusting the overlap amount and current setting, and reasonably adjusting the welding wheel pressure, the problem of virtual welding can be effectively prevented and solved, ensuring the normal operation of the production line and the stable improvement of product quality.