First, prevention of chemical damage
1. Chemicals should be stored in designated areas far away from the work area, and safety facilities must be provided at the same time.
2. You must wear protective equipment and carry and use chemicals according to the operation process.
3. In case of leakage, corrosion and ignition of chemicals, it is necessary to operate correctly according to the operation specifications to avoid the accident from expanding.
4, must be timely according to the operating rules and procedures to put the used chemicals back into the specified container, put an end to accidents.
Second, to prevent gas shock
1, SMT equipment in the process of operation or debugging, if an accident happens accidentally, should decisively press the emergency stop button, or pull down the power switch, make the equipment stop working immediately, at the same time, turn off the air supply.
2. The air gun must be placed in the specified position with eye-catching warning to prevent others from misoperation.
Third, visual protection
1, SMT equipment in the process of operation, debugging, repair, need to wear protective glasses, to avoid eyes looking straight at the light source.
2, SMT equipment doors and windows or protection as little as possible, to prevent accidents.
Fourth, fire safety
1, the flammable products must be tightly capped after use, and placed in the specified position.
2. It is forbidden to use kindling when entering the factory. If it is necessary to use kindling, make sure that the kindling has been completely extinguished before leaving.
3. When using power, ensure that the power cord is in good condition, and the phenomenon of "one plug for multiple purposes" is strictly prohibited.
4. Employees must learn to use fire-fighting equipment.
