Shenzhen Baiqiancheng Electronic Co.,Ltd
+86-755-86152095

What are the methods for removing BGA chips in SMT patch processing?

Nov 25, 2024

1. Preparation:

Ensure that the working environment is dry, static protection, and use anti-static equipment.

Prepare necessary tools such as hot air gun, flux, desoldering machine, solder wire, etc.

2. Heating BGA chip:

Use a hot air gun to evenly heat the entire BGA chip area. The hot air temperature should be gradually increased to avoid heating too quickly to prevent damage to the circuit board and other components.

3. Use of flux:

Apply flux around the BGA chip. The flux helps to reduce the surface tension of the solder joint and make the solder flow more easily.

4. Monitoring the solder status:

Observe the solder status and stop heating when the solder begins to melt and become liquid.

5. Use a desoldering machine to absorb solder:

Use a desoldering machine around the BGA chip to absorb the melted solder. Make sure that the mouth of the desoldering machine fits tightly against the solder joint to avoid damaging the circuit board.

6. Repeat the operation:

It may take several heating, fluxing and soldering operations until the solder joints are completely removed.

7. Lift the BGA chip with force:

Use a solder sucker or a professional BGA chip removal tool to gently lift the BGA chip. Avoid using excessive force to avoid damaging the solder joints and circuit boards.

8. Solder joint cleaning:

Wipe the circuit board with a residue-free cleaner or alcohol to ensure that the solder joint area is clean.