Wave soldering is the process of directly contacting the welding surface of the plug-in board with high-temperature liquid tin to achieve the welding purpose. The high-temperature liquid tin maintains a slope and is formed into waves by a special device, so it is called "wave soldering". Its main material is the solder strip.
Coating flux: The PCB board is transmitted into the wave soldering machine, passing through the detector, and the nozzle sprays uniformly along the starting position of the fixture, so that a layer of flux is applied to the solder pads, circuit vias, and component pin surfaces of the PCB board;
PCB board preheating: The circuit board continues to be transported, and the infrared heat pipe or heat plate is heated. The PCB board is heated to the wetting temperature to activate the flux, and the humidity is controlled between 70-110 ℃ during the preheating stage;
1) The first peak is as the temperature inside the welding machine continues to rise, and the solder paste is gradually heated into a liquid state. The special device inside the machine causes the liquid tin to form a wave shape, and its edge plate passes above it. The parts that need to be soldered on the components come into contact with the liquid tin, so that they can be firmly adhered to the board;
2) The second peak is a "smooth" wave, with a slow flow rate of solder, which can effectively remove excess solder on the terminals, wetting all welding surfaces well, and fully correcting the pulling and bridging caused by the first peak;
Circuit board air cooling: As the internal temperature of the wave soldering machine reaches its peak, the PCB temperature drops sharply through the refrigeration system for cooling






