Shenzhen Baiqiancheng Electronic Co.,Ltd
+86-755-86152095

Revealing the Characteristics and Usage Precautions of PCB Ink

Aug 04, 2025

Revealing the Characteristics and Usage Precautions of PCB Ink

PCB ink refers to the ink used in Printed Circuit Boards (PCB). Its important physical properties include viscosity, thixotropy, and fineness. Understanding these physical properties is essential for improving the ability to use the ink.

 

1.Characteristics of PCB Ink

 

  •   Viscosity and Thixotropy

Screen printing is an indispensable and important process in PCB manufacturing. To ensure the fidelity of image reproduction, the ink must have good viscosity and appropriate thixotropy.

  1.   Viscosity refers to the internal friction of a liquid. It represents the frictional force exerted by the inner layer of liquid when an external force causes one layer of liquid to slide over another. Thick liquids have greater mechanical resistance to inner-layer sliding, while thinner liquids have less resistance. The unit of viscosity measurement is the poise. It is particularly important to note that temperature has a significant impact on viscosity.
  2. Thixotropy is a physical property of liquids: their viscosity decreases under stirring and quickly returns to the original viscosity when left to stand. Through stirring, the effect of thixotropy persists long enough to reconstitute its internal structure. Thixotropy is crucial for high-quality screen printing. During the squeegeeing process, the ink is agitated and liquefied, which accelerates its passage through the mesh and helps the ink, originally separated by mesh lines, merge evenly into a single layer. Once the squeegee stops moving, the ink returns to a static state, and its viscosity quickly reverts to the required level.

info-575-363

  • Fineness

Pigments and mineral fillers are generally solid. After fine grinding, their particle size does not exceed 4/5 of a micron, forming a homogeneous flow state in solid form. Therefore, it is critical for the ink to have good fineness.

info-685-371

2.Precautions for Using PCB Ink

Based on the practical experience of most manufacturers, the following regulations must be followed when using ink:

 

  1. Under no circumstances should the ink temperature exceed 20-25℃, and temperature fluctuations should not be excessive. Otherwise, the ink's viscosity, screen printing quality, and results will be affected.

Especially if the ink is stored outdoors or at varying temperatures, it must be acclimatized to the ambient temperature for several days before use, or the interior of the ink barrel must reach a suitable temperature. Using cold ink can cause screen printing failures and unnecessary troubles. Therefore, to maintain ink quality, it is best stored under normal temperature conditions.

 2.Before use, the ink must be thoroughly and carefully stirred by hand or machine. If air enters the ink, it should be left to stand for a period before use. If dilution is required, the ink must be fully mixed first, and then its viscosity tested. After use, the ink barrel must be sealed immediately. Additionally, never return ink from the screen to the barrel to mix with unused ink.

 3.It is advisable to use compatible cleaning agents for screen cleaning, ensuring thorough and complete cleaning. Clean solvents are recommended during the cleaning process.

 4.Ink drying must be carried out in a device equipped with a good exhaust system.

Screen printing operations should be performed in a workspace that meets the technical requirements of the process.

info-634-352