Shenzhen Baiqiancheng Electronic Co.,Ltd
+86-755-86152095

Reflow welding process requirements

Aug 08, 2024

Reflow soldering technology is no stranger in the field of electronic manufacturing. Components on various boards used in our computers are soldered by this process. On the circuit board. The advantages of this process are that the temperature is easy to control, oxidation can be avoided during welding, and the manufacturing cost is easier to control. There is a heating circuit inside this equipment, which heats nitrogen to a high enough temperature and blows it to the circuit board where the components have been attached, so that the components can be The solder on both sides is melted and bonded to the motherboard. 1, to set up a reasonable reflow soldering temperature curve and regularly do real-time test of temperature curve. 2, according to the PCB design welding direction for welding. 3. Keep the conveyor belt from vibrating during welding. 4. The welding effect of the first printed board must be checked. 5. Whether the welding is sufficient, whether the surface of the solder joint is smooth, whether the shape of the solder joint is half-moon, the situation of solder balls and residues, and the situation of continuous welding and virtual welding. Also check the color change of PCB surface. And adjust the temperature curve according to the inspection results. In the whole batch production process to decide Check the welding quality.