1.What is false welding and false welding
A cold solder joint refers to a solder joint that appears intact but does not form a solid connection, while a false solder joint refers to a solder joint that is extremely weak and cannot withstand the various currents and temperatures of the product. These problems not only reduce the reliability of the product, but may even cause subsequent failures and safety hazards, thereby increasing maintenance costs.
2.Six ways to prevent cold solder joints and false solder joints:
- Strictly control the storage of components
When we start designing circuit boards, we must pay great attention to the storage of components. Dry the components thoroughly and replace the oxidized components in time.
- Carefully select high-quality solder paste
When selecting solder paste, circuit board designers must pay attention to the ratio of its alloy components to flux. If the ratio of these components is unbalanced, the activity of the flux may not be enough, resulting in the inability of the solder paste to ensure good wettability, which in turn causes cold solder joints and false solder joints. Therefore, the selection of high-quality solder paste is an important step to ensure the quality of welding.
- Accurately debug the parameters of the printer
Designers need to consider the parameter adjustment of the printer when designing, ensure the control of the scraper pressure, and make the solder paste evenly printed on the pad. In addition, it is also crucial to choose a suitable steel mesh, which can effectively ensure the printing volume and accuracy of the solder paste, thereby effectively avoiding the problem of insufficient tin.
- Reasonable planning of reflow soldering curve temperature
When designing circuit boards, designers need to plan reasonable reflow soldering curve temperatures according to the actual conditions of circuit boards and components. If the preheating zone time is insufficient, the flux activity will be insufficient and the oxides at the welding point cannot be cleaned. If the welding zone time is not properly controlled, it may lead to poor soldering of solder joints. In order to ensure the quality of welding, it is particularly important to reasonably set the temperature and time of each welding stage.
- Minimize manual soldering
When designing circuit boards, it is recommended to minimize the use of manual soldering. Because manual soldering is often affected by the technical level of the welder, the temperature of the soldering iron is not easy to control, and the components are also prone to false soldering and false soldering due to movement. In contrast, reflow soldering technology can avoid these problems to a certain extent and improve production efficiency and welding quality.
- Standardize the use of soldering irons
In PCBA welding and post-maintenance, soldering irons are indispensable tools. During the welding process, it is very important to keep the soldering iron tip clean. According to different components and solder joints, choose the appropriate welding power and control the temperature between 300℃-360℃ to ensure stable and reliable welding quality.






