In through-hole assembly processes, the extent to which solder penetrates the PCB is referred to as the through-hole fill rate. This rate is a critical factor affecting the quality of the solder joints. According to IPC industry standards, the required through-hole fill rate for solder joints generally ranges from 75% to 100%. However, for plated through-holes that serve as thermal conduction layers for heat dissipation, the fill rate requirement is 50% or higher.
Influencing Factors:
High-temperature molten solder has strong penetration abilities. For typical PCBs and electronic components, it can penetrate well, resulting in a relatively stable fill rate. However, there are exceptions. For instance, aluminum surfaces have a protective oxide layer that resists penetration by other molecules. In such cases, flux can be used to remove surface oxides and improve soldering performance. Therefore, the material of the PCB affects the PCBA through-hole fill rate.
Wave soldering, as the primary soldering equipment for DIP (Dual In-line Package) components, directly impacts soldering quality. Factors such as the height of the wave, temperature profiles, the speed of the product's movement, and the duration of soldering all play crucial roles. Proper control of the wave soldering process directly determines the fill rate. Adjusting the angle of the conveyor and increasing the contact area between the leads and molten solder can enhance the penetration rate of the solder.
Flux is an indispensable tool in the soldering process, affecting various aspects of soldering. Its primary function is to remove oxides from the surfaces of PCBs and components and prevent reoxidation during soldering. Choosing a high-quality flux is crucial. Using low-quality flux, applying flux unevenly, or using an insufficient amount of flux can all lead to poor through-hole fill rates.
By considering these factors and optimizing the materials, soldering process, and flux used, the through-hole fill rate and overall quality of PCBA solder joints can be significantly improved.






