Shenzhen Baiqiancheng Electronic Co.,Ltd
+86-755-86152095

PCBA packaging requirements and precautions

May 30, 2025

After the PCBA patch completes all processing procedures, in order to ensure that the PCBA board delivered to the customer is in an intact state, special packaging is required before shipment to prevent damage during transportation. In addition to arranging drivers to deliver the goods, it is usually transported by express logistics, especially for foreign orders, which require multiple modes of transportation. In this case, the packaging method is particularly important. Some customers will list their required packaging requirements when placing an order. If the customer does not require it, we need to follow the following requirements:

  • 1. PCBA is a relatively fragile and easily damaged product. Before transportation, it must be carefully packaged with anti-static bubble bags, pearl cotton, anti-static bags, and vacuum bags.
  • 2. Static electricity will break down the chip in the PCBA board. Since static electricity is invisible and easy to generate, it must be packaged in an anti-static way during packaging and transportation. The flux and other residues on the PCBA board must be cleaned before packaging. Some products have extremely high requirements for the dryness of components, which can be solved by spraying three-proof paint.
  • 3. Due to seasonal changes in weather, PCBAs may become damp during transportation. To avoid such situations, desiccant should be placed before sealing during packaging.
  • 4. Put the packaged PCBA into an anti-static packaging box, place it vertically and stack it upwards (not too high, according to the height of the box, the arrangement should be evaluated according to the situation). The PCBA board cannot be placed flat in the box alone. Laying it flat may cause damage to the components due to shaking and squeezing.
  • 5. For smaller PCBAs, the pearl cotton can be made into a tray style, strictly abide by the requirement that only one PCBA is loaded in one anti-static bag, and then the PCBA is placed flat on the pearl cotton tray. When one tray is full, continue to stack the trays online. Similarly, it cannot be stacked too high. After all are placed, a layer of pearl cotton is laid on the top layer for protection.
  • 6. Small and light PCBAs can be placed in small boxes after being packed with anti-static bags, and the outside needs to be fully sealed with tape to prevent moisture during transportation; PCBAs with larger boards and more components should be packed in card-type packaging as much as possible after being packed with anti-static bags, and the outer box also needs to be fully sealed with tape to ensure waterproof and moisture-proof. If necessary, corner guards need to be added to the corners of the box for protection to prevent the box from being squeezed and damaged by the PCBA inside.