The main components of the welding materials:
1. Organic solvents: One or a mixture of several types from ketones, alcohols, and esters. Commonly used ones include ethanol, propanol, and butanol; acetone, methyl isobutyl ketone, and toluene; ethyl acetate, butyl acetate, etc. They serve as the liquid components.
2. Surfactants: Surfactants containing halogens have strong activity and high soldering aid ability. However, since halogen ions are difficult to clean thoroughly, the ion residue level is high, and halogen elements (mainly chlorides) are highly corrosive.
3. Organic acid activators: Composed of one or several types from organic dibasic acids or aromatic acids, such as succinic acid, glutaric acid, itaconic acid, o-hydroxybenzoic acid, sebacic acid, pimelic acid, malic acid, succinic acid, etc. Their main function is to remove the oxides on the lead pins and the oxides on the surface of the molten solder, which is one of the key components of the flux.
4. Corrosion inhibitors: Reduce the substances remaining after the solid components such as resins and activators decompose at high temperatures.
5. Cosolvents: Prevent the tendency of solid components such as activators from precipitating out of the solution and avoid the uneven distribution of the activators. Film-forming agents: During the soldering process of the lead pins, the applied flux precipitates and crystallizes to form a uniform film. Due to the presence of the film-forming agent, the residues after the high-temperature decomposition of the flux can be quickly cured, hardened, and the viscosity can be reduced.
The functions of commonly used soldering fluxes:
1. Destroy the metal oxide film to make the surface of the solder clean, which is conducive to the wetting of the solder and the formation of the solder joint alloy. 2. It can cover the surface of the solder to prevent the solder or the metal from continuing to oxidize. 3. Enhance the activity of the surface of the solder and the metal to be soldered, and reduce the surface tension of the solder. 4. The solder and the soldering flux are mutually miscible, which can increase the fluidity of the solder and further improve the wetting ability. 5. It can accelerate the transfer of heat from the soldering iron tip to the surface of the solder and the object to be soldered. 6. An appropriate soldering flux can also make the solder joints look aesthetically pleasing.






