Due to its high energy density, high specific energy and power, lithium SBs are considered the most promising batteries for EV energy storage. In addition, lithium batteries have no memory and are free of harmful substances such as mercury and lead. However, this type of battery is relatively expensive; A safety protection and battery balancing system are required to ensure consistent battery performance at the same voltage and battery level.
Lithium batteries have a category specifically designed for high-temperature environmental applications, except for sodium- β Batteries, lithium aluminum iron (lithium aluminum FES) and lithium aluminum iron (lithium aluminum FeS2) are high-temperature lithium batteries, which have the highest energy capacity among all lithium batteries. However, this type of lithium battery has a short cycle life, requires thermal management, and can cause significant energy loss due to the need to maintain operating temperature. The operating temperature range of lithium sulfur batteries is 375-500 ℃. The high-temperature lithium-sulfur battery consists of lithium aluminum alloy as the anode, iron sulfide as the cathode, and molten lithium chloride potassium chloride as the electrolyte and separator. In these batteries, lithium Al alloys are used to control the activity of lithium, and iron sulfides are used to prevent iron corrosion.
Other lithium batteries that operate normally at ambient temperatures are mainly lithium polymer batteries and lithium-ion batteries used in electric vehicle applications. The difference between polymer and lithium-ion batteries is that the former uses lithium metal as a reactor, while the latter does not have lithium metal in the system. Lithium polymer batteries are suitable for various manufacturing shapes and exhibit toughness and reliability. However, their conductivity and power density are relatively poor.
Due to its small size, light weight, and potential, lithium-ion batteries are very popular in energy storage and portable electrical and electronic products. Lithium ion batteries have high energy density, high power density of 500 to 2000 W/kg, low self discharge, and long lifespan. However, the life cycle of lithium-ion batteries is significantly affected by temperature and may be compromised in the event of deep discharge. According to the continuous use of positive electrode materials, lithium-ion batteries are classified into three types: lithium manganese oxide (LiMn2O4), lithium iron phosphate (LiFePO4), nickel manganese cobalt oxide (LiNiMnCoO2), lithium nickel cobalt aluminum oxide (LiNiCoAlO2), and lithium titanate (Li4Ti5O12) batteries.






