Introduction of Different Types of PCBA Testing
PCBA testing is a very important link in the PCBA processing process. It is at the end of the production process. Testing the soldered PCBA boards is an important means to strictly control the quality of shipments. Common types of tests:
1. ICT test
ICT test is also known as online tester. ICT test mainly detects the open circuit, short circuit and the welding of components on the PCBA board through the test probe contacting the test point of the PCB. ICT test has the characteristics of simple operation and high accuracy. Some low-end PCBA boards can be specially made for ICT test fixtures, which can effectively reduce test costs
2. FCT test
FCT test can also be called PCBA functional test, which can provide a simulated operating environment (excitation and load) for the test target, so that it can work in various states to measure whether the parameters of the output end meet the requirements. FCT test refers to the test of the internal function of the target. The content of the test mainly includes voltage, current, power, power factor, frequency, duty cycle, brightness and color, character recognition, voice recognition, temperature measurement, pressure measurement, motion control, FLASH and EEPROM programming, etc.
3. Aging test
The aging test refers to the long-term power-on of the PCBA board, the input and output tests are carried out, and the user's operation is simulated to ensure that its performance meets the requirements of the market.
4. Fatigue test
Fatigue test refers to the high-frequency and long-term operation of the PCBA, to observe whether there is failure, and to judge the probability of failure in the test, so as to check the working performance of the PCBA board.
5. Vibration test
For some PCB boards with vibration test requirements, a professional vibration tester is used for long-term testing to ensure that the welding components do not fall off. The sampling test ratio is determined according to customer requirements.
Shenzhen Baiqiancheng Electronics Co., Ltd. has been in production for 19 years, and has been insisting on FCT testing of each piece of PCBA, program firing of PCBA boards with SMT patches and DIP plug-ins, and information about access, environment, voltage/current, pressure For other aspects of testing, the test points are selected according to the customer's test plan. Only after this series of tests can we ensure that the products shipped to customers are in good condition.







