Enhance the rigidity of structural materials
For example, in the production process, plastic products that were originally used can be replaced with metal casings to enhance their resistance to external forces. If you do not want to change the material of the casing, you can consider adding ribs to change the stress surface, thereby changing its compressive strain capacity. Some PCBA designers also use coverage to enhance its strength, but this type of cover must be made of rigid material to be effective.
By designing the structure to support the circuit board and prevent its deformation, a pillar can be grown from the front and rear casings, and then the circuit board can be supported. This can reduce the impact and impact force of electronic products falling from a height, and minimize the deformation of the circuit board as much as possible.
It is well known that cushioning materials reduce the impact force on products. When electronic products fall from a high place, they will be subjected to a large impact force, which can cause the product to break or break into pieces. The solution to this problem is to choose a good cushioning material to reduce this impact force. However, PCBA designers also pointed out that this method is not suitable for all electronic products. It is only suitable for those with fixed screws at one end of the circuit board, which can provide buffering effect, while others are difficult to achieve.
Factors to consider in the design and production process of PCBAProduct functions such as covering basic requirements, product upgrade functions, additional product executable functions, and components that are easy to make and manage.
Nowadays, there are many manufacturers engaged in the design and production of PCBA, and different manufacturers offer different aspects such as product quality, cost-effectiveness, and cost. As a PCBA designer, we must strive to improve product quality, reduce product costs, and provide enterprises with low investment and high return options. So, in the PCBA design process, all aspects should be considered in order to ensure the final cost and investment return rate.
PCBA design cannot be completed solely by one person, it requires teamwork to complete. Therefore, in order to design a good circuit board, it is necessary to have strong team support.
